Vepr 12 SBS NFA Shotgun, 12.5" barrel

an artwork by 
Vepr 12 SBS NFA Shotgun, 12.5" barrel
Vepr 12 SBS NFA Shotgun, 12.5' barrel

Part Number:

Your Price:$2,799.00


Out of Stock
This is a new factory Molot Vepr 12ga.that has been converted by our gunsmiths.

It is a 12.5" barrel gun and it will shoot low or high brass reliably because we have modified the Fire Control Group, the Bolt and Carrier and the Gas System to do so.

Here is a list of what has been done.
First the FCG has been changed to a US Made FCG with a polished and re-profiled FCG for a smoother action and better reliability with low brass.
We have included a Warthog brake but can change it to another type for you.
These Vepr12s have had their ports modified by us as well as the gas block so that they will shoot low brass ammo. Something that they were never designed to do.

It also has the LRBHO.
Bolt and Carrier were ground, reworked and polished as well.
In addition the extractor has been modified, the rails polished, the extractor ramp modified, and the internal spring for recoil has been changed.
This gun has a stock fore grip but we have it optionally available with our custom welded dust cover on the gas tube, a Chaos Quad Rail fore end, or our custom powder coated slots and holes fore grip, all at extra charge.
A Tromix Oversize charging knob has been installed.
The folding stock is now the folding factory Skeleton stock or the ACE stock with push button hinge (slight additional charge).
The rear railed dust cover hinges up out of the way for easy access to the bolt and carrier and the FCG for easy cleaning.
It also has the VEPR Integrated leaf rear sights with windage and elevation adjustments .
The Bolt and Carrier has been polished in all the areas that can improve performance.
The bottom of the carrier has also been jeweled and the rails buffed out.
The trigger pull is approx 4.5 lbs. but can be lowered by us if desired

A Hogue Overmolded Grip has been installed.
Paint has been touched up with a solvent resistant Ceramic based paint.

The gun can be fired with the stock open or folded.
We have removed the gas block and modified the gas ports in the barrel as well as worked on the gas block itself in order to aid in the gun's ability to cycle low brass ammo such as bird shot and the low recoil stuff all the while in a SBS gun.
Something these guns were never designed to do.
A RAM ambidextrous mag release extension will be added but we took these pictures before shipping the gun out for engraving.
An after market reduced power recoil spring is also added.

Fire the gun, release a mag, all without taking your hand off the pistol grip.
The gun handles flawlessly as all guns modified by our gunsmiths go to the range for testing and 20 or more rounds put through them before shipping.
This is a new gun under warranty.

Recently Viewed Items