This is a new factory Saiga 12ga.that has been converted by our gunsmiths.

It has a 10.5" barrel gun and it will shoot low or high brass reliably because we have modified the Fire Control Group, the Bolt and Carrier and the Gas System to do so.



Here is a list of what has been done.
First the FCG has been changed to a US Made FCG with a polished and re-profiled FCG for a smoother action and better reliability with low brass.
We have included a Tromix Shark brake but can change it to another type for you.
This Saiga 12 has had its ports modified by us as well as the gas block so that they will shoot low brass ammo. Something that they were never designed to do even when full size.

Bolt and Carrier were ground, reshaped and polished as well.
In addition the extractor has been modified, the rails polished, the extractor ramp modified, and the internal spring for recoil has been changed.
We then installed a modified aftermarket gas adjustment knob to work with the port and gas block work we did. And changed the recoil spring as well.
This gun has a custom Aluminum fore grip that has been powder coated. And we can install rails in any of the slots that you see on it at a slight optional charge.
A Tromix Oversize charging knob has been installed as well as a barrel nut to key the attached brake.
The folding stock is an ACE SOCOM adjustable stock and is attached via a push button hinge for easy one handed folding.
The Bolt and Carrier has been polished in all the areas that can improve performance.
The bottom of the carrier has also been jeweled and the rails buffed out.
The trigger pull is approx 4.5 lbs. but can be lowered by us if desired

A Hogue Overmolded Grip has been installed.
Paint has been touched up with a solvent resistant Ceramic based paint.

The gun can be fired with the stock open or folded.
We have removed the gas block and modified the gas ports in the barrel as well as worked on the gas block itself in order to aid in the gun's ability to cycle low brass ammo such as bird shot and the low recoil stuff all the while in a SBS gun.
Something these guns were never designed to do.
A RAM ambidextrous mag release extension was also added.
An after market reduced power recoil spring is also added.

Fire the gun, release a mag, all without taking your hand off the pistol grip.
The gun handles flawlessly as all guns modified by our gunsmiths go to the range for testing and 20 or more rounds put through them before shipping.
This is a new gun under warranty.